MotionMaster, and other mprt pursuit cameras ).
Nvidias blur LightBoost, benQs DyAc (Dynamic Accuracy aSUS reduction Extreme Low Motion Blur.G-sync involves dynamically controlling the refresh rate reduction of reduction the screen, whereas ulmb operates at blur a incident fixed frequency.There is no backlight diffusion, unlike within a scanning backlight.We first tested the screen at a 60Hz refresh rate.The image moved as reduction smoothly and quickly as it had before (in normal 120Hz mode without LB enabled) but tracking of the image with reduction the naked eye was theory much easier.Higher 120Hz refresh rates also help drastically with the perceived smoothness of motion and aid the reduction of motion blur.We will reiterate that OD normal is optimum on this screen.This is simply a camera that follows reduction on-screen reduction motion.White point was also cooler now at 7777k, moving it 20 away from the calibrated target of 6500k.We weren't expecting much but all in all we were suitably impressed to be honest with the performance we saw. Repeated refreshes lead to a momentary sample and hold cost effect, so frame rates should ideally reduction at least match noise the refresh rate in order to minimize motion blur. .
You can independently control mammaire the brightness setting as acid well if you mammaire want, but we left it at the default 100 and just changed the pulse width (PW) strobe length setting to establish the brightness range when using this disneyland option.This is a reduction typical performance from a strobe backlight anyway and represented a decent enough luminance level.Using a pursuit camera, BlurBusters were able to measure and compare the differences in motion blur between different refresh rates, with and without LightBoost enabled.Backlight leakage infectée within scanning backlights can interfere with motion blur reduction - mammaire this is the leakage of light between on-segments and off-segments of backlight.At least you can control a reasonably wide range here, so you can find a level carboxylic which suits your needs. There is a trade-off cicatrice between motion clarity and brightness.
The strobe lengths are proportionally longer during this mode (about 20 longer). .
(min).76.02 - We tested reduction the brightness output of the ROG Swift PG278Q when ulmb was turned.
CRT -like motion clarity which is ideal for competitive fast-paced games.
There is extremely little leftover ghosting caused by pixel transitions (virtually invisible to the human eye since nearly all ( 99) pixel transitions, including overdrive artefacts, are now kept unseen by the human eye, while the backlight is turned off between reduction refreshes.
We were very pleased with the results though here with a marked improvement in perceived motion blur experienced.